Hach-lange ORBISPHERE 6110 OPC Instruction Manual Manuel d'utilisateur

DOC024.52.93075ORBISPHERE Model 6110 OPCClient/Server Link01/2013, Edition 1Instruction Manual

Level 2 Level 3 HS volumeLiquid volumePackage volumeHS O2 quantityLiquid O2 quantityTotal O2 quantityLiquid dissolved O2 concentrationHS CO2 quantity

"Message.Out.Calibration" itemThe item "Calibration" is considered as Level 1 in the three level hierarchy described in OPC itemso

Error value Error description0x0080 No package0x0100 Ultrasound0x0200 Upper limit0x0400 Clear flag detection0x0800 P2 too low0x1000 HS pressure

Note: The package must be created directly on the 6110 instrument, or through a web browser connected to the6110 web server. It cannot be created usin

Error value Error description0x00040000 Antifoam counter0x00080000 Pending action0x00100000 Pending manual action0x00200000 No flow0x00400000 RIM dete

HACH COMPANY World HeadquartersP.O. Box 389, Loveland, CO 80539-0389 U.S.A.Tel. (970) 669-3050(800) 227-4224 (U.S.A. only)Fax (970) 669-2932orders@hac

Table of ContentsPrerequisites...3Overvie

Table of Contents2

PrerequisitesThis document assumes the following is already installed on the 6110 instrument and the PC:6110 Instrument• Operating system version 1.10

5. Start the OPC client application on the PC to display the initial screen. 6. Enter the CLSID number in the <CLSID of the OPC Data Access Server&

Note: If communications problems are encountered between the OPC client and server it may be necessary toadjust the DCOM and/or Firewall configuration

All date fields are formatted according to the ISO 8601 extended format "YYYY-MM-DDThh:mm:ssZ"where "T" is the Date/Time separator

Level 2 Level 3 CO2 P/T MaxMinEnabledHS volume MaxMinEnabledLiquid volume MaxMinEnabledDO2 MaxMinEnabledCO2 true MaxMinEnabledFormula 1 MaxMinEnabl