Hach-lange ORBISPHERE 6110 Basic User Manual Manuel d'utilisateur télécharger pdf (Page 11)

1. Product tab

Option Description

Solubility Enter the type of beverage in the package.

Headspace Check this box for a fast measurement sequence that provides data from the

headspace only.

Equilibrated This is only available if Headspace (previous box) is checked. Check this box if you

require the additional total O

and dissolved CO

measurements taken from the

headspace.

Slow Decompress If checked, then after the measurement process has completed, a slow release of any

remaining pressure will take place so the package can be handled safely.

Formula Define up to five different formulae for computing a new parameter. The formula

definitions must already have been entered into the system (see Formula management

on page 12 for details).

2. Package tab

Option Description

Comment Enter a free-format alphanumeric text. This text will appear against the package description

in the main package management screen.

Brimful volume Enter the volume of the package when full to overflowing.

Height Enter the overall height of the package. This information is used if you activate the

Package size check option in Measurement output on page 12.

Tilt position Enter the tilt position of the package holder (optional). This should be 1, 2, or 3 and

corresponds to the number on the tilt knob on the front of the instrument .

Pck backstop Position of the package backstop (optional). The backstop is calibrated on a scale of zero

to seven.

Package type Select the correct image for the type of package being measured (bottle, can, etc.). The

setups for each icon are different, so it is important to select the correct one.

Note: The above reference values are also displayed at the start of the measurement process for the package,

so the operator can adjust the instrument accordingly (tilt position, etc.).

3. Alarms tab

Option Description

Alarm parameters Select the parameter to define the alarm settings, and enter the minimum and maximum

values allowable for each parameter listed. When the measurement value falls below

the minimum level or exceeds the maximum level for any parameter listed, an alarm will

be triggered.

4. Factors tab

Option Description

Factors Small adjustments can be made to the measurements listed by entering a factor. This defaults to

1.000 for all measurements to indicate no adjustment. If this is changed then the measurement

calculated by the instrument will be multiplied by this factor to give an adjusted measurement value.

English 11

1 2 ... 6 7 8 9 10 11 12 13 14 15 16 ... 301 302

Pas de commentaire

Hach-lange ORBISPHERE 6110 Basic User Manual Manuel d'utilisateur Page 11